Flat Rate Shipping

PayPal Acceptance Mark


SSL Certificates

Product Instructions


Quick links:

 

Quick & Easy Instructions

Peel
adhesive liner from template then stick to wrong side of material.
Cut
with pinking shears or scissors.
Stick
swatch to card after removing adhesive liner from swatch.

 

Original and Crafter Series Instructions

  1. Remove printed liners from adhesive template and affix adhesive to the wrong side of fabric. Press adhesive firmly to fabric.
  2. Using the adhesive template as a guide, cut out a fabric swatch with pinking shears or scissors.
  3. Remove remaining liner from adhesive and affix swatch to plastic swatch card. Adhere swatch label to back of swatch card.

 

Designer Series Instructions

  1. Swatches are mounted to swatch cards using our adhesive templates. Choose your swatch size from the chart below. Cut adhesive template if required.

  2. Remove printed liners from adhesive template and affix to the wrong side of fabric. Press adhesive firmly to fabric.
  3. Using the adhesive template as a guide, cut out a fabric swatch with pinking shears or scissors.
  4. Remove remaining liner from adhesive and affix swatch to plastic swatch card. Adhere swatch label to back of swatch card. Assemble swatch cards on steel ring and secure with thumb screw.

 

Swatch-it-All Instructions

Creating Paint Swatch Cards

Brush a small amount of paint directly on the paperboard card surface. Allow paint on card to air-dry completely before handling.

Swatching Fabric (or other materials such as paper)

  1. Remove printed liners from adhesive template and affix to the wrong side of fabric. Press adhesive firmly to fabric.
  2. Using the adhesive template as a guide, cut out a fabric swatch with pinking shears or scissors.
  3. Remove remaining liner from adhesive and affix swatch to paperboard swatch card. Label pertinent swatch information on backside of card.

 

Refill Kit Instructions

  1. Remove old swatch (with attached adhesive) and swatch label by slowly peeling away from plastic swatch card.
  2. Use the instructions in the sections above to make a new swatch using the additional adhesive templates and labels from your Refill Kit.

 

Opening & Closing Cable Rings

  1. OPENING: Hold one end of cable ring with one hand. With your other hand, attempt to unscrew the fastener by twisting it towards you. If the fastener does not twist easily then you may be tightening the ring. Reverse the ring and reattempt.
  2. CLOSING: To secure the ring simply insert the male threaded end into the fastener and twist the fastener. Hand tighten firmly to ensure that the fastener is secured, but be careful not to overtighten.